[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]
Subject: RE: [virtio-dev] Re: [PATCH v3] It is a virtio based RPMB (Replay Protected Memory Block) device.
> -----Original Message-----
> From: virtio-dev@lists.oasis-open.org [mailto:virtio-dev@lists.oasis-open.org] On
> Behalf Of Michael S. Tsirkin
> Sent: Tuesday, August 6, 2019 04:24 AM
> To: Huang, Yang <yang.huang@intel.com>
> Cc: virtio-dev@lists.oasis-open.org; [email protected]; Zhu, Bing
> <bing.zhu@intel.com>; Winkler, Tomas <[email protected]>; Fang, Peter
> <peter.fang@intel.com>
> Subject: [virtio-dev] Re: [PATCH v3] It is a virtio based RPMB (Replay Protected
> Memory Block) device.
>
> On Tue, Aug 06, 2019 at 12:04:16PM +0800, Huang Yang wrote:
> > Signed-off-by: Yang Huang <yang.huang@intel.com>
> > Reviewed-by: Bing Zhu <bing.zhu@intel.com>
> > Reviewed-by: Tomas Winkler <tomas.winkler@intel.com>
> >
> > v2 -> v3:
> > 1. Remove conformance changes temporarily
> > since the draft requires reviews and updates at this phase.
> > 2. Add eMMC, UFS and NVMe as Normative References.
> > 3. Add more details on:
> > RPMB frame
> > Request Type/Response Type
> > 4. Add differentiation JEDEC RPMB and NVMe RPMB.
> > 5. Define config layout
> > 6. Illustrate behaviors of all RPMB requests 7. Remove RPMB device ID
> > reservation,
> > it will be submitted with an independent patch.
> > ---
> > content.tex | 1 +
> > introduction.tex | 9 ++
> > virtio-rpmb.tex | 269
> > +++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 279 insertions(+)
> > create mode 100644 virtio-rpmb.tex
> >
> > diff --git a/content.tex b/content.tex index ee0d7c9..2573bd5 100644
> > --- a/content.tex
> > +++ b/content.tex
> > @@ -5677,6 +5677,7 @@ \subsubsection{Legacy Interface: Framing
> > Requirements}\label{sec:Device \input{virtio-input.tex}
> > \input{virtio-crypto.tex} \input{virtio-vsock.tex}
> > +\input{virtio-rpmb.tex}
> >
> > \chapter{Reserved Feature Bits}\label{sec:Reserved Feature Bits}
> >
> > diff --git a/introduction.tex b/introduction.tex index
> > c96acf9..2579bf3 100644
> > --- a/introduction.tex
> > +++ b/introduction.tex
> > @@ -60,6 +60,15 @@ \section{Normative References}\label{sec:Normative
> References}
> > \phantomsection\label{intro:SCSI MMC}\textbf{[SCSI MMC]} &
> > SCSI Multimedia Commands,
> >
> > \newline\url{http://www.t10.org/cgi-bin/ac.pl?t=f&f=mmc6r00.pdf}\\
> > + \phantomsection\label{intro:eMMC}\textbf{[eMMC]} &
> > + eMMC Electrical Standard (5.1),
> > + \newline\url{https://www.jedec.org/standards-documents/docs/jesd84-
> b51}\\
> > + \phantomsection\label{intro:UFS}\textbf{[UFS]} &
> > + UNIVERSAL FLASH STORAGE (UFS), Version 3.0,
> > + \newline\url{https://www.jedec.org/standards-
> documents/docs/jesd220c}\\
> > + \phantomsection\label{intro:NVMe}\textbf{[NVMe]} &
> > + NVM Express, Revision 1.3
> > +
> > + \newline\url{https://www.nvmexpress.org/wp-content/uploads/NVM_Expre
> > + ss_Revision_1.3.pdf}\\
> >
> > \end{longtable}
> >
>
> At this stage I suggest we avoid nvme. Mix of LE and BE in the frame is just too
> nasty. And ATM Linux only supports UFS/MMC.
>
>
>
> Second, please assess the relevance of anything you copy to virtual devices.
> Copying things like padding does not buy us anything, and just creates work where
> we need to zero this out.
>
> The only thing that must match if you are passing through a hardware device is
> the size and order of keys.
>
>
>
> > diff --git a/virtio-rpmb.tex b/virtio-rpmb.tex new file mode 100644
> > index 0000000..c2357af
> > --- /dev/null
> > +++ b/virtio-rpmb.tex
> > @@ -0,0 +1,269 @@
> > +\section{RPMB Device}\label{sec:Device Types / RPMB Device}
> > +
> > +virtio-rpmb is a virtio based RPMB (Replay Protected Memory Block)
> > +device. It is used as a tamper-resistant and anti-replay storage.
> > +The device is driven via requests including read, write, get write
> > +counter and program key, which are submitted via a request queue.
> > +This section relies on definitions from paragraph 6.6.22 of
> > +\hyperref[intro:eMMC]{eMMC}, 12.4 of \hyperref[intro:UFS]{UFS} and
> > +8.10 of \hyperref[intro:NVMe]{NVMe}.
>
>
>
>
>
>
>
> > +\subsection{Device ID}\label{sec:Device Types / RPMB Device / Device
> > +ID}
> > +
> > +28
> > +
> > +\subsection{Virtqueues}\label{sec:Device Types / RPMB Device /
> > +Virtqueues}
> > +
> > +\begin{description}
> > +\item[0] requestq
> > +\end{description}
> > +
> > +\subsection{Feature bits}\label{sec:Device Types / RPMB Device /
> > +Feature bits}
> > +
> > +None.
> > +
> > +\subsection{Device configuration layout}\label{sec:Device Types /
> > +RPMB Device / Device configuration layout}
> > +
> > +All fields of this configuration are always available.
> > +
> > +\begin{lstlisting}
> > +enum virtio_rpmb_type {
> > + RPMB_TYPE_JEDEC,
> > + RPMB_TYPE_NVME,
>
> enum {} has no meaning in spec. any constants must be defined.
>
> > +};
> > +
>
> Do we have to expose the type? I think we need feature bits for various things so
> we can split them out later.
>
>
>
> > +struct virtio_rpmb_config {
> > + u8 capacity;
> > + u8 max_wr_cnt;
> > + u8 max_rd_cnt;
> > + u8 id;
> > + u8 type;
> > +}
>
> How about adding a key programmed state here?
>
>
> > +\end{lstlisting}
>
>
> Why not put the counter here?
>
> Are all fields read-only?
>
> > +
> > +\begin{description}
> > +\item[\field{capacity}] is the capacity of the device (expressed in 128KB units).
> > + The values MUST range between 0x00 and 0x80 inclusive for JEDEC device,
> and
> > + 0x00 and 0xFF inclusive for NVMe device.
>
> I'd just drop this. u8 so up to 0xff anyway, and I don't think any users care that
> there are a couple of extra bytes.
>
> Thinking about it, 32Mbytes isn't huge at all. Why not allow larger capacity?
>
>
>
>
> > +\item[\field{max_wr_cnt and max_rd_cnt}] are the maximum numbers of RPMB
> > + block count that can be performed to device in one request. 0 implies
> > + no limitation.
>
> I don't understand what does block count mean in this context.
>
> > +\item[\field{id}] is the identifier of RPMB partitions.
>
> What does this mean? what are the partitions? Did you mean of the device?
if this is for multiple RPMB targets or units in single storage device which are available/supported in real UFS3.0 or NVMe storage device,, I don't think we need to implement this capability in virtio-rpmb device. Because I don't think we will have real usage like that in virtualization environment. So we can just simply emulate a single-RPMB virtual storage.
@Tomas, does this make sense?
>
> I suspect what is going on is there's an actual device behind this, and this is its ID.
> Which again begs the question whether this should just be a part of a blk or scsi
> device.
>
>
> > +\item[\field{type}] is the rpmb type that device emulates. RPMB_TYPE_JEDEC
> > + refers to eMMC or UFS while RPMB_TYPE_NVME refers to NVMe.
> > +\end{description}
>
> Does not look like we emulate anything.
>
> > +
> > +\devicenormative{\subsection}{Device Initialization}{Device Types /
> > +RPMB Device / Device Initialization}
> > +
> > +\begin{enumerate}
> > +\item The virtqueue is initialized.
> > +\item The authentication key of device MUST NOT be programmed at the first
> device initialization.
>
> What is "first device initialization"? The concept does not seem to apply to virtual
> devices. How about we just have device pre-initialized to some key? Or maybe
> device can be in two states, key programming and operation?
>
>
> All conformance clauses belong in conformance sections. here and elsewhere.
>
> > +\item The device capacity MUST be initialized to a multiple of 128Kbytes and
> up to
> > + 16Mbytes/32Mbytes (JEDEC/NVMe device respectively).
> > +\end{enumerate}
>
> So instead of blindly copying limitations of physical devices, we can just allow
> hypervisor to set any capacity.
>
> > +
> > +\subsection{Device Operation}\label{sec:Device Types / RPMB Device /
> > +Device Operation}
> > +
> > +The operation of a virtio RPMB device is driven by the requests placed on the
> virtqueue.
> > + The type of the request can be program key
> > +(VIRTIO_RPMB_REQ_PROGRAM_KEY),
> > + get write counter (VIRTIO_RPMB_REQ_GET_WRITE_COUNTER),
> > + write (VIRTIO_RPMB_REQ_DATA_WRITE), and read
> (VIRTIO_RPMB_REQ_DATA_READ).
> > + A program key or write request can also combine with a
> > + result read (VIRTIO_RPMB_REQ_RESULT_READ) for a returned result.
> > +
> > +\begin{lstlisting}
> > +/* RPMB Request Types */
> > +#define VIRTIO_RPMB_REQ_PROGRAM_KEY 0x0001
> > +#define VIRTIO_RPMB_REQ_GET_WRITE_COUNTER 0x0002
> > +#define VIRTIO_RPMB_REQ_DATA_WRITE 0x0003
> > +#define VIRTIO_RPMB_REQ_DATA_READ 0x0004
> > +#define VIRTIO_RPMB_REQ_RESULT_READ 0x0005
> > +\end{lstlisting}
> > +
> > +\subsubsection{Device Operation: Request Queue}\label{sec:Device
> > +Types / RPMB Device / Device Operation / Device Operation: Request
> > +Queue}
> > +
> > +The request information is delivered in RPMB frame.
> > +The frame is in size of 512B for JEDEC RPMB, and in size of 256B plus
> > +multiple 512B for NVMe RPMB depending on the variable data size.
>
> Again this is just messy. Let's come up with a minimal spec.
> See end of the message pls.
>
> > +
> > +\begin{lstlisting}
> > +struct virtio_rpmb_frame_jedec {
> > + u8 stuff[196];
> > + u8 key_mac[32];
> > + u8 data[256];
> > + u8 nonce[16];
> > + be32 write_counter;
> > + be16 address;
> > + be16 block_count;
> > + be16 result;
> > + be16 req_resp;
> > +};
> > +
> > +struct virtio_rpmb_frame_nvme {
> > + u8 stuff [191];
> > + u8 key_mac[32];
> > + u8 rpmb_target;
> > + u8 nonce[16];
> > + le32 write_counter;
> > + le32 address;
> > + le32 block_count;
> > + le16 result;
> > + le16 req_resp;
> > + u8 data[0];
> > +};
>
> Oh fun, a mix of LE and BE.
>
> Let's make everything consistent.
>
> Why do we need the "stuff" field? It helps align the size to 256 byte boundary - but
> why do we care?
>
>
>
> > +
> > +/* RPMB Response Types */
> > +#define VIRTIO_RPMB_RESP_PROGRAM_KEY 0x0100
> > +#define VIRTIO_RPMB_RESP_GET_COUNTER 0x0200
> > +#define VIRTIO_RPMB_RESP_DATA_WRITE 0x0300
> > +#define VIRTIO_RPMB_RESP_DATA_READ 0x0400
> > +
> > +/* RPMB Operation Results */
> > +#define VIRTIO_RPMB_RES_OK 0x0000
> > +#define VIRTIO_RPMB_RES_GENERAL_FAILURE 0x0001
> > +#define VIRTIO_RPMB_RES_AUTH_FAILURE 0x0002
> > +#define VIRTIO_RPMB_RES_COUNT_FAILURE 0x0003
> > +#define VIRTIO_RPMB_RES_ADDR_FAILURE 0x0004
> > +#define VIRTIO_RPMB_RES_WRITE_FAILURE 0x0005
> > +#define VIRTIO_RPMB_RES_READ_FAILURE 0x0006
> > +#define VIRTIO_RPMB_RES_NO_AUTH_KEY 0x0007
> > +#define VIRTIO_RPMB_RES_WRITE_COUNTER_EXPIRED 0x0080
> > +\end{lstlisting}
> > +
> > +\begin{description}
> > +\item[\field{stuff}] Padding for the frame.
> > +
> > +\item[\field{key_mac}] is the authentication key or the message
> > + authentication code (MAC) depending on the request/response type.
> > + If the request is VIRTIO_RPMB_REQ_PROGRAM_KEY, it's used as
> > + authentication key. Otherwise, it's used as MAC. The MAC is calculated
> > + using HMAC SHA-256.
>
> SHA-256 is pretty old. Not being a cryptographer I don't really know whether it's
> still a good mac to use in 2019.
Yes, SHA-256 is pretty old, SHA-384 or larger would be good, but actually ^HMAC^ w/ SHA-256 is still safe (at least before year 2030 according to our crypto experts) . also, right now eMMC/UFS only defines HMAC SHA256. NVMe can optionally support higher.
But not sure if it is possible to extend this in the future upgrade.
> Generally security considerations should probably be presented with anything
> dealing with crypto.
> In this case, I'd do a feature bit so we can change the crypto down the road.
>
>
> > It takes as input a key and a message. The key
> > + used for the MAC calculation is always the 256 bit RPMB authentication
> > + key. The message used as input to the MAC calculation is the
> > + concatenation of the fields in the RPMB frames excluding stuff bytes
> > + and the MAC itself.
> > +
> > +\item[\field{rpmb_target}] is the exclusive item for NVMe device. It is
> > + the RPMB target to access.
>
> There are multiple targets too?
>
> > +
> > +\item[\field{data}] is used to be written or read by signed access.
>
> What does signed access mean?
>
> > It's
> > + fixed 256B for JEDEC device while variable sized payload
> > + 512 * \field{block_count} for NVMe device.
> > +
> > +\item[\field{nonce}] is a random number
>
>
> random how? I think it can just be anything.
>
>
> > generated by user for the read or
> > + get write counter requests and copied to the response by device.
> > +
> > +\item[\field{writer_counter}] is the counter value for the total amount of
> > + the successful authenticated data write requests.
> > +
> > +\item[\field{address}] is the address of the data to be written to or read
> > + from the RPMB virtio device. It is the serial number of the accessed
> > + half sector (256B for JEDEC device) or sector (512B for NVMe device).
>
> serial number?
>
> > +
> > +\item[\field{block_count}] is the number of blocks (256B for JEDEC and 512B
> > + for NVMe) requested to be read/written.
>
> can't this be intuited from the buffer size somehow?
>
> I don't really understand how can you both have block_count and a fixed size data.
> how does this make sense?
>
>
> > +
> > +\item[\field{result}] includes information about the status of access made
> > + to the device.
> > +
>
> So I am guessing result is written by the device?
> And type is written by the driver?
> this does not play well with virtio where write fields are followed by read fields.
>
>
> > +\item[\field{req_resp}] is the type of request or response, as defined above,
> > + to/from the device.
>
> this seems to be the 1st definition. Please avoid "above" and "below", just link to
> the definition.
>
> > +\end{description}
> > +
> > +\devicenormative{\paragraph}{Device Operation: Request Queue}{Device
> > +Types / RPMB Device / Device Operation / Device Operation: Request
> > +Queue}
> > +
> > +The device MUST parse the request from the request queue and emulate
> > +the behaviours described in paragraph
> > +6.6.22 of \hyperref[intro:eMMC]{eMMC}, 12.4 of \hyperref[intro:UFS]{UFS} or
> 8.10 of \hyperref[intro:NVMe]{NVMe}:
>
> If you are going to emulate existing specs, then why not just emulate an existing
> spec? Why bother with virtio at all? You gain ability to use existing drivers.
>
> If the reason is to make a clean abstraction, then IMHO this falls short of this goal,
> carrying on all kind of baggage from hardware specs.
>
> > +
> > +\begin{description}
> > +
> > +\item[VIRTIO_RPMB_REQ_PROGRAM_KEY] If block count has not been set to 1
> > + then VIRTIO_RPMB_RES_GENERAL_FAILURE is responded. If programming of
> > + authentication key fails then returned result is
> VIRTIO_RPMB_RES_WRITE_FAILURE.
> > + If some other error occurs then returned result is
> VIRTIO_RPMB_RES_GENERAL_FAILURE.
> > + The \field{req_resp} value VIRTIO_RPMB_RESP_PROGRAM_KEY corresponds to
> > + the key programming request.
> > +
> > + If VIRTIO_RPMB_REQ_RESULT_READ is requested, the device returns the
> RPMB frame
> > + with response (VIRTIO_RPMB_RESP_PROGRAM_KEY), the calculated MAC and
> the result.
>
> I don't see what does VIRTIO_RPMB_REQ_RESULT_READ buy us.
> I guess it proves key has been programmed - but if someone can snoop on
> programming then for sure he has the key and won't have trouble faking the mac.
>
> > +
> > +\item[VIRTIO_RPMB_REQ_GET_WRITE_COUNTE] If the authentication key is
> not yet
> > + programmed then VIRTIO_RPMB_RES_NO_AUTH_KEY is returned in
> \field{result}.
> > + If block count has not been set to 1 then
> VIRTIO_RPMB_RES_GENERAL_FAILURE
> > + SHOULD be responded.
> > +
> > + The device returns the RPMB frame with response
> (VIRTIO_RPMB_RESP_GET_COUNTER),
> > + the writer counter, a copy of the nonce received in the request, the
> calculated
> > + MAC and the result.
> > +
> > +\item[VIRTIO_RPMB_REQ_DATA_WRITE] If the authentication key is not yet
> programmed
> > + then VIRTIO_RPMB_RES_NO_AUTH_KEY is returned in \field{result}. If block
> count
> > + is zero or greater than \field{max_wr_cnt} then
> VIRTIO_RPMB_RES_GENERAL_FAILURE
> > + MUST be responded. The device MUST check whether the write counter has
> expired.
> > + If the write counter is expired then sets the \field{result} to
> > + VIRTIO_RPMB_RES_WRITE_COUNTER_EXPIRED. If there is an error in the
> address
> > + (out of range) then the \field{result} is set to
> VIRTIO_RPMB_RES_ADDR_FAILURE.
> > + The device MUST calculate the MAC taking authentication key and frame as
> input,
> > + and compares this with the MAC in the request. If the two MACâs are
> different
> > + then VIRTIO_RPMB_RES_AUTH_FAILURE is returned.
> > +
> > + If the writer counter in the request with is different from the one
> maintained
> > + by device then VIRTIO_RPMB_RES_COUNT_FAILURE is returned in
> \field{result}.
> > + If the MAC and write counter comparisons are successful then the write
> request
> > + is considered to be authenticated. The data from the request are written to
> the
> > + address indicated in the request and the write counter is incremented by 1.
> > + If write fails then returned result is VIRTIO_RPMB_RES_WRITE_FAILURE. If
> some
> > + other error occurs during the write procedure then returned result is
> > + VIRTIO_RPMB_RES_GENERAL_FAILURE.
> > +
> > + If VIRTIO_RPMB_REQ_RESULT_READ is requested, the device returns the
> RPMB data
> > + frame with response (VIRTIO_RPMB_RESP_DATA_WRITE), the incremented
> counter value,
> > + the data address, the calculated MAC and result.
> > +
> > +\item[VIRTIO_RPMB_REQ_DATA_READ] If the authentication key is not yet
> programmed
> > + then VIRTIO_RPMB_RES_NO_AUTH_KEY is returned in \field{result}. If block
> count
> > + has not been set to 1 then VIRTIO_RPMB_RES_GENERAL_FAILURE MUST be
> responded.
> > + If there is an error in the address (out of range) then the \field{result} is
> > + set to VIRTIO_RPMB_RES_ADDR_FAILURE. If data fetch from addressed
> location inside
> > + device fails then returned result is VIRTIO_RPMB_RES_READ_FAILURE. If
> some other
> > + error occurs during the read procedure then returned result is
> > + VIRTIO_RPMB_RES_GENERAL_FAILURE.
> > +
> > + The device returns the RPMB frame with response
> (VIRTIO_RPMB_RESP_DATA_READ),
> > + the block count, a copy of the nonce received in the request, the address,
> > + the data, the calculated MAC, and the result.
> > +
> > +\item[VIRTIO_RPMB_REQ_RESULT_READ] It is used following with the other
> request
> > + types for returned result in one or multiple RPMB frames.
>
> So each write request must be followed by a status request. This just seems like
> a waste. Why not return the result immediately with the operation? Maybe UFS
> doesn't support this but virtio sure does.
>
>
> Does device have to maintain the last request in non-volatile memory and persist
> across resets? You do not list it as being persistent below. So I would just drop
> this request type and have driver maintain it in guest memory.
>
> > For
> > + VIRTIO_RPMB_REQ_PROGRAM_KEY and VIRTIO_RPMB_REQ_DATA_WRITE, if
> block count has
> > + not been set to 1 of VIRTIO_RPMB_REQ_RESULT_READ request, then
> > + VIRTIO_RPMB_RES_GENERAL_FAILURE SHALL be indicated.
> > +
> > +\end{description}
> > +If authetication key was programmed successfully, the device SHALL return
> with a MAC for any operation requests.
>
> Lots of typos above make it pretty hard to figure out.
>
> > +
> > +\drivernormative{\subsubsection}{Device Operation}{Device Types /
> > +RPMB Device / Device Operation}
> > +
> > +The driver MUST configure and initialize virtqueue for the requests received.
>
> received where? why isn't it legal to e.g. check feature bits and then reset?
>
> > +
> > +\devicenormative{\subsubsection}{Device Operation}{Device Types /
> > +RPMB Device / Device Operation}
> > +
> > +The virtio-rpmb device could be backed in a number of ways. It SHOULD
> > + keep consistent behaviors with hardware as described in paragraph
> > + 6.6.22 of \hyperref[intro:eMMC]{eMMC}, 12.4 of \hyperref[intro:UFS]{UFS}
> > + or 8.10 of \hyperref[intro:NVMe]{NVMe}.
> > Some elements are maintained
> > + by the device:
> > +\begin{enumerate}
> > +\item The device maintains an one time programmable authentication key.
> > + It cannot be overwritten, erased or read. The key is used to
> > + authenticate the accesses when MAC is calculated. This key MUST be
> > + kept regardless of device reset or reboot.
> > +\item The device maintains a read-only monotonic write counter. It MUST
> > + be initialized to zero and added by one automatically along with
> > + successful write operation. The value cannot be reset. After
> > + the counter has reached its maximum value 0xFFFF FFFF, it will
> > + not be incremented anymore. This counter MUST be kept regardless
> > + of device reset or reboot.
> > +\item The device maintains the data for read/write via authenticated
> > + access.
> > +\end{enumerate}
> > +
>
>
>
> What I have gathered from above is really just a counter and a key added to a
> storage device.
>
> Key: you must have the key to write. It's programmed into the
> device at some point by manufacturer.
> So later, only someone who got key from manufacturer can write.
> Data is also authenticated with the key, so if you got
> the key from manufacturer you can verify it's valid.
>
> What if you didn't get the key but you steal the data
> in transit to storage device somehow? You could
> replay it to the device and overwrite valid data.
> To this end device maintains write counter,
> so you can't.
>
> What if you can pretend write failed, or filter out writes to pretend
> they succeeded? First write counter will be wrong, but it's tricky for
> applications to verify the counter: after all an application can crash.
> So each write is followed by a response and users must validate MAC to
> make sure write made it to the device.
>
>
> On the other hand, what if again you didn't get the key but you steal
> the read response? You could replay that to the application. To this
> end read requests include a random value and it's copied to the
> response. Application can put e.g. a counter there.
>
Right, read uses random value for anti-replay, while write uses counter for anti-replay.
>
> I think we are coming back full circle and I would like to ask: so why does it not
> make sense to add this functionality to a block device, or a scsi device? We'd get
> lots of goodies such as multiqueue, for free.
>
>
> If we implement above in a hypervisor in software, we can just ignore all random
> hardware limitations, and support e.g. arbitrary size of writes, arbitrary hash etc
> etc.
>
> So I think this is the reason you are making it a separate device and are trying to
> support so many messy formats is because you are thinking about pass-through.
>
> However, I note that neither driver nor the hypervisor really care about things
> like order of fields or endian-ness.
> It's only the MAC calculations that are affected.
Maybe we can simply this by only supporting one single rpmb, and one single type of rpmb (like UFS) ??
>
> So my suggestion is, for now just define a clean minimal interface, with some
> kind of enumerator for an application to discover the specific MAC used. And
> when hypervisor is forwarding the data to the device, it can move fields around,
> swap endian-ness or whatever. Will cost some performance but it does not look
> like this device is fast path anyway.
>
> And I am guessing most people do trust the hypervisor and so they will happily
> just use a clean software implementation.
>
> > --
> > 2.7.4
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
> For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org
[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]