[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]
Subject: Re: [wsbpel] Issue - 274 - Proposal to Vote
+1 to Alex here.
Consider a CH that has two execution paths. All CH in a CH instance group
would take one path and complete, except one which takes the other path and
fails.
There is no point in treating missingReply different from any other fault,
e.g. uninitializedVariable. You could always use the same rationale for
suppressing a fault, regardless of what fault it was.
OTOH, suppressing a fault in a CH would let you continue on an inconsistent
path. You could always argue about cases where 99% could complete. But then
you can model it differently and try to catch faults more locally (again,
no difference between missingReply and any other fault).
Kind Regards
DK
Dieter K�nig Mail: dieterkoenig@de.ibm.com IBM Deutschland Entwicklung GmbH
Senior Technical Staff Member Tel (office): (+49) 7031-16-3426 Sch�naicher Strasse 220
Architect, Business Process Choreographer Fax (office): (+49) 7031-16-4890 71032 B�blingen
Member, Technical Expert Council Tel (home office): (+49) 7032-201464 Germany
Alex Yiu
<alex.yiu@oracle.
com> To
Mark Ford
11.05.2006 05:38 <mark.ford@active-endpoints.com>
cc
wsbpel@lists.oasis-open.org,
"'Danny van der Rijn'"
<dannyv@tibco.com>, Dieter
Koenig1/Germany/IBM@IBMDE,
alex.yiu@oracle.com
Subject
Re: [wsbpel] Issue - 274 - Proposal
to Vote
Hi Mark,
Thanks for the quick reply.
Yes, we should converge to a proposal soon.
Maybe, I can stress few more things:
My first point and third point actually go together. Let me rephrase some
of my points. Hopefully the linkage in my logic is clearer.
Point [1]
The missingReplies error is actually resulted from the modelling
mistake or unanticipated runtime failure in the CH of the child scope
, not the FH of the parent scope. Fault at the CH level is more
precise.
Point [3]
Consider case [a]: a CH forget to initialize a variable before using
it. And, that is a modelling error in the CH. Then, this modelling
error causes uninitializedVariable to be thrown from the CH to the
"calling"/"invoking" fault handler.
Now consider case [b]: a CH forget to reply after receiving a
request. And, that is a modelling error in the CH.
Should we treat these two cases of modelling error symmetrically?
That is, causes a missingReply fault to be thrown from the CH to the
"calling"/"invoking" fault handler.
Or, we would NOT detect this modelling error as early as possible
simialr to the case of uninitializedVariable. And, let the calling FH
continue until the end of it?
This is the asymmetry treating modelling errors related to
missingReplies and other fault (e.g. uninitializedVariable) concerns
me. This asymmetry applies to one more bullet below.
Additional points:
[4]
So far the existing checking logic for missingReply (described in the
previous four bullets in this section) are to check orphaned IMA as
early as possible. If we check it at the end of CH, it would be more
consistent.
[5]
Mark Ford wrote:
Lastly, the syntax below for providing <catchAll> around the
<compensateScope> only allows continuation for other targets
and not other instances within the same instance group.
Granted, the language for faults within an instance group cause
it to short circuit but I go back to my point above about the
difference between a fault and the check for the condition.
Similar asymmetry plays here. If you encounter an modelling error
within a CH other than missingReply, it will also stop other CH
instances within the same group from executing anyway. If you really
want a comprehensive solution (instead of special treatment of
missingReply) for all fault situations, it may be better to have
suppressFault="yes" in a compensation activitiy. That is, when a
fault happens within a group, the fault will be suppressed and other
instances of CH can continue. But, that is a new switch feature to
Dieter's proposal on compensation. It may be better delayed to next
version of WS-BPEL spec.
And, I would argue that when a bunch of CH instances are grouped
together, they may tend to be related. Hence, it may be more useful
to stop other instances of CH to be execute. (Think of the situation
the CH-instance-group is created by a <while> loop).
[6]
The semantics of checking at the end of FH does not allow the
behavior of stopping the calling FH from the further execution
immediately. On the other hand, in the case of non-CH-instance-group
situation, checking at the end of CH will allow us to choose: to end
the calling FH immediately or to suppress the fault and continue with
other CH. That is: faulting at CH level is more flexible.
Particularly, if one defines a suppressFault="yes".
I would also appreicate additional feedback on these 2 variants of
proposal.
Thanks again!
Regards,
Alex Yiu
Mark Ford wrote:
Alex,
I agree with your first point in that this is a modeling error or
unanticipated runtime failure.
I am not in complete agreement with the second. The compensation
handler is an optional continuation of the scope but the scope is in
a different state during its compensation so it's not so strange to
me to have different rules for checking for error conditions. Since
the scope's fault handlers have been uninstalled then I consider it
the responsibility for an activity outside of the scope to detect the
fault.
I don't agree with your third point. I view the faults in bpel as
being raised as soon as they are detected by the engine. This
detection process occurs through the execution of an activity,
evaluation of a link, receipt of data ...etc. In the case of
bpel:missingReply, there is no fault until the check is made. The
previous four bullets in this section have normative language about
when the check for the orphaned IMA's is made, not how the fault is
handled.
That said, I think your most compelling argument for having the CH
check for the orphaned IMA's is that the compensation work for
multiple scopes may be related so you would want the compensation
handler to check for orphaned IMA's fault immediately. On the other
hand, they may not be related so it could be better to let it
continue.
Lastly, the syntax below for providing <catchAll> around the
<compensateScope> only allows continuation for other targets and not
other instances within the same instance group. Granted, the language
for faults within an instance group cause it to short circuit but I
go back to my point above about the difference between a fault and
the check for the condition.
In any case, we need to close this issue on the next call so I'd
appreciate any additional feedback or other input from the group.
Thanks.
From: Alex Yiu [mailto:alex.yiu@oracle.com]
Sent: Wednesday, May 10, 2006 4:26 PM
To: Mark Ford
Cc: wsbpel@lists.oasis-open.org; Alex Yiu; Danny van der Rijn;
'Dieter Koenig1'
Subject: Re: [wsbpel] Issue - 274 - Proposal to Vote
Hi Mark,
I guess you would not be surprised that I still prefer detecting
orphaned IMA at the end of compensationHandler. Reasons are:
The missingReplies error is actually resulted from the
modelling mistake or unanticipated runtime failure in the child
scope (which the CH is attached), not the FH of the parent
scope. Fault at the CH level is more precise.
From section 12.4.2: "This is because their compensation
handlers are still available, and therefore the execution of
such scopes may continue during the execution of their
compensation handlers, which can be thought of as an optional
continuation of the behavior of the associated scope." I tend
to interprete that the primary (normal) activity of the scope
is its part #1, while the activity of the CH of that scope is
its part #2. Their nature should be symmetrical in the
counter-working way. If we perform certain checks in part #1,
similar checks should happen in part #2.
The asymmetry between missingReplies and other fault (e.g.
selectionFailure) concerns me. (This is the last but the most
important point.) If there is a problem in the CH logic that
triggers a fault (e.g. selectionFailure), it will be propagated
from the CH to the corresponding compensation activity in
FCTHandler (fault, compensation and termination). If there is
no fault handling around the compensation activity, the whole
FCTHandler will not continue. But, now we are saying that the
FCTHandler will continue until its end, if the error condition
is the missingReplies fault? This asymmetry may be surprising
to users. I would say it may the process more difficult to
model.
Let me use one more example to illustrate my preference. If one wants
to continue the logic in a FH including continuing other compensation
activities, one want to add a scope
That is changing from:
---------------------------------------
<catch ... >
<sequence>
<compensationScope target="A" />
<compensationScope target="B" />
<compensationScope target="C" />
</sequence>
</catch>
---------------------------------------
to:
---------------------------------------
<catch ... >
<sequence>
<scope>
...
<catchAll> <empty/> </catchAll>
...
<compensationScope target="A" />
</scope>
<compensationScope target="B" />
<compensationScope target="C" />
</sequence>
</catch>
---------------------------------------
This <catchAll> will handle all kind of faults, not just
missingReplies.
Again, it will allow BPEL process definition to have a finer grain of
control on how to handle missingReplies fault.
Also, **if** the work of "A", "B" and "C" are highly related to each
other, I would say that it is actually more common for the process
designer to prefer the compensation work stop immediately, if the
compensation of "A" failed. That will avoid any propagating any
strange states from "A" to "B" and "C". That is also consistent with
the design of Compensation Handler Instance Group. That is, if one
instance fails within the group, other instances (not started yet)
will not be attempted.
I hope I did a better convincing job this time. :-)
More thoughts?
Thanks!
Regards,
Alex Yiu
Mark Ford wrote:
In dealing with an orphaned IMA within a compensation handler,
it seems to me that there are two possible resolutions. Either
the compensation handler detects the orphaned IMA's and faults
or the detection of orphaned IMA's is deferred to the fault
handler or termination handler that invoked the compensation
handler. I am in favor of the latter since it allows
compensation to continue even with orphaned IMA's. There is
very little that can be done with these orphaned IMA's so we
may as well allow the compensation logic to proceed as best it
can and defer its fault to
I have reworded my original proposal to avoid introducing any
new terms as per Danny's suggestion. The approach is still the
same in that the detection of an orphaned IMA is NOT made by
the compensationHandler.
Add a fifth bullet to Section 12.2 which reads as follows:
No checks for orphaned IMA's are made when a compensation
handler completes. The compensation handler's execution must
necessarily start from within a fault or termination handler so
any orphaned IMA's created by a compensation handler will be
detected and handled as described in the above bullets.
[Date Prev] | [Thread Prev] | [Thread Next] | [Date Next] -- [Date Index] | [Thread Index] | [List Home]