... yes, the stylesheet correctly selects A4... and I confirm there is
no font.size parameters in other included files.
Anyway, I can also survive with 10pt fonts :-)
Thank you for your hints.
j3d
On Mon, 2011-12-19 at 10:23 -0800, Richard Hamilton wrote:
> Giuseppe,
>
> In the file you point to, I notice that you also include two other stylesheets. I'd take a look at those and see if they set body.font.size.
>
> Also, make sure that the style sheet is actually being run (i.e., check that the other changes, like setting the page size to A4, are occurring).
>
> Good Luck
>
> Dick
> On Dec 19, 2011, at 2:06 AM, Giuseppe Greco wrote:
>
> > Hi Dick,
> >
> > My customization layer is trivial and looks fine - if you want you can give a look at http://www.agamura.com/docbook/xsl/current/fo/docbook.xsl
> >
> > I don't set the body.font.size parameter anywhere... I'll try what you suggest here below as soon as I get home this evening.
> >
> > Talk 2 u soon,
> > j3d
> >
> >
> > On 19.12.2011 02:59, Richard Hamilton wrote:
> >> Giuseppe,
> >>
> >> Here are a couple of things to check out:
> >>
> >> 1) Are you sure your customization is being called correctly and that
> >> this parameter isn't in a comment or otherwise not seen?
> >>
> >> 2) body.font.master is indirectly used to set the body.font.size
> >> parameter, which actually sets the body font point size. So, make sure
> >> you're not setting body.font.size somewhere else in your
> >> customization. It is already set as follows in the standard param.xsl
> >> file:
> >>
> >> <xsl:param name="body.font.size">
> >> <xsl:value-of select="$body.font.master"/><xsl:text>pt</xsl:text>
> >> </xsl:param>
> >>
> >> If you have set it to some other value in your customization, that
> >> could be the problem.
> >>
> >> If that doesn't fix the problem, you might try to put the three lines
> >> above in your customization and see if that makes a difference.
> >>
> >> HTH
> >>
> >> Best Regards,
> >> Dick Hamilton
> >> -------
> >> XML Press
> >> XML for Technical Communicators
> >> http://xmlpress.net
> >>
> >>
> >> On Dec 18, 2011, at 1:52 PM, Giuseppe Greco wrote:
> >>
> >>> Dear all,
> >>>
> >>> I added the following statement to my customization layer to set the
> >>> default font size to 12:
> >>>
> >>> <xsl:param name="body.font.master">12</xsl:param>
> >>>
> >>> ... but when I generate the PDF I always get the default size (10).
> >>>
> >>> Am I missing something?
> >>>
> >>> Tx,
> >>> j3d
> >>>
> >>> --
> >>> ----------------------------------------
> >>> Giuseppe Greco
> >>> 6949 Comano
> >>> Switzerland
> >>>
> >>> call giuseppe.greco via Skype
> >>> phone: +41 (0)91 234 51 09
> >>> mobile: +41 (0)79 590 33 06
> >>> email:
> >>> ----------------------------------------
> >>>
> >>>
> >>> ---------------------------------------------------------------------
> >>> To unsubscribe, e-mail:
> >>> For additional commands, e-mail:
> >>>
> >>
> >>
> >> ---------------------------------------------------------------------
> >> To unsubscribe, e-mail:
> >> For additional commands, e-mail:
> >
> > --
> > GIUSEPPE GRECO
> > Chief Technology Officer
> >
> > Agamura, Inc.
> > 6900 Lugano - Switzerland
> > Phone +41 (0)91 234 51 09 ● Mobile +41 (0)79 590 33 06 ● Skype
> > giuseppe.greco
> > - www.agamura.com
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail:
> > For additional commands, e-mail:
> >
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail:
> For additional commands, e-mail:
>
--
----------------------------------------
Giuseppe Greco
6949 Comano
Switzerland
call giuseppe.greco via Skype
phone: +41 (0)91 234 51 09
mobile: +41 (0)79 590 33 06
email:
----------------------------------------
