I see several reasons for ensuring that we keep both the Tag and type their current 4 byte lengths.
We are still under 255 tags (156) but we are planning to define server to server at some point in the future (v2.0 and beyond) and there are extensions that we want to allow
for. I wouldn't want to hamstring ourselves by not planning for it now.
Plus we don't know what may change for the clients in later versions of the standard that might be useful to this type of device.
I think we should set the expectation now before people potentially code themselves into a corner by accident.
The other issue we would have is that it would limit or remove the number of extensions that we might want to allow either via registration or assignment in the future for other standards that want
to make use of KMIP.
I agree with the four byte boundaries but don't want to limit ourselves. If we do this I like Glen's suggestion in 1C and I don't know how soon we will hit 256 types but I am thinking it will take a little longer
to generate them than it would to create another 99 new tags (thinking of server to server & extensions).
My 2 cents for the day,
Bob L.
Robert A. (Bob) Lockhart
Senior Solutions Architect
THALES Information Systems Security
-------------------------------------------------------
T: +1 408 457 7711 (Direct)
M: +1 510 410 0585
F: +1 408 457 7681
E:
W:
www.nCipher.com
nCipher product line. See
www.nCipher.com
From: Glen Jaquette []
Sent: Monday, April 27, 2009 5:28 PM
To:
Subject: Re: [kmip] Feedback on binary alignment proposal
Matt,
I do see value in revising the TTLV protocol to align it to 4 byte boundaries, I think we just have to work through the details to make sure we find the best trade-off. Here are my thoughts:
Your proposal devolves into 2 main ideas which are essentially separable:
You observe that the present composition is essentially a 4 byte Tag followed by a 1 byte Type field (i.e. (4-byte Tag = 0x42.00.00.YZ)) which immediately throws off the 4 byte alignment, and this is a first thing
that needs to be addressed. There are various ways to address that:
The specific proposal you illustrated on slide 6 is option 1.1 from slide 5 -- namely to drop the leading byte of the four Tag field, which is 0x42 in all cases today, making it effectively a 3 byte Tag. Then
you transpose the Type and Tag fields, giving:
(1-byte Type) | (3-byte Tag = 0x00.00.YZ)
=> Pro: this decreases the number of bytes which need to be communicated to give both Tag and Type by one
=> Con: in response to which a Tony and Jon observed that this eliminates the 0x42 which has proven useful in the testing so far
Someone else (didn't catch the name) suggested that instead we just pad Tag out to 4 bytes, or effectively:
(4-byte Tag = 0x42.00.00.YZ) | 4-byte Type)
=> Pro: this preserves the 0x42.00.00 that can be used to distinguish the start of a new Tag, and hence the start of a new TTLV message
=> Con: this increases the number of bytes which need to be communicated to give both Tag and Type by three
A third option which occurs to me is a variation of option 1.2 from your slide 5, namely to cut a different byte from the Tag (0x00 instead of 0x42) and then
not transpose or effectively:
(4-byte Tag = 0x42.00.YZ) | 1-byte Type)
=> Pro: this decreases the number of bytes which need to be communicated to give both Tag and Type by one (i.e. same as 1A)
=> Pro: this preserves the first two of the distinguishable bytes (i.e. 0x42.00) that can be used to distinguish the start of a new Tag, and hence the start of a new TTLV message, though one could argue that is slightly
less than the 3 bytes that exist today.
Similarly make the Value modulo 4 bytes by:
Padding binary fields out to the next 4 byte boundary
Making BIGNUM fields an integer number of 4 byte fields long
As far as #1 above, I would suggest we consider 1C. As far as #2, I don't see how to improve on your proposal.
Regards,
Glen Jaquette
IBM Distinguished Engineer
(520) 799-2192; fax: -4138; tieline 321-
Matt Ball <>
Sent by:
04/27/2009 09:26 AM
To
cc
Subject
[kmip] Feedback on binary alignment proposal
Hi Folks,
If you have any preferences regarding the encoding choices from last
Friday's binary alignment presentation, please send them to me by
tomorrow so that I can incorporate them into the first revision of the
proposal. I plan to have the full proposal ready for discussion during
Thursday's meeting, if there is time available on the agenda.
Thanks!
-Matt
View Document Details:
http://www.oasis-open.org/committees/document.php?document_id=32244
Download Document:
http://www.oasis-open.org/committees/download.php/32244/Sun%20KMIP%20Alignment%20Proposal.pdf
---------------------------------------------------------------------
To unsubscribe from this mail list, you must leave the OASIS TC that
generates this mail. Follow this link to all your TCs in OASIS at:
https://www.oasis-open.org/apps/org/workgroup/portal/my_workgroups.php
The information contained in this e-mail is confidential. It may also be privileged. It is only intended for the stated addressee(s) and access to it by any other person is unauthorised. If you are not an addressee or
the intended addressee, you must not disclose, copy, circulate or in any other way use or rely on the information contained in this e-mail. Such unauthorised use may be unlawful. If you have received this e-mail in error please delete it (and all copies) from
your system, please also inform us immediately on +1 (781) 994 4000 or email . Commercial matters detailed or referred to in this e-mail are subject to a written contract signed for and on behalf of nCipher Inc.
